Heavy duty construction, oversized bearings and balanced non-clogging vortex impellers allow these pumps to stand up to the highest heads and maximum flows. Using Zoeller® cool run design, we added fins to these pumps, lowering operating temperatures. The corrosion resistant, epoxy powder coated finish and hermetically sealed, oil- filled motor add up to a long lasting, trouble-free product.

Zoeller® Submersible Sewage Pump, 1-Seal, Series: Waste-Mate 280, 179 gpm, 2 or 3 in FNPT Outlet, 35 ft Maximum Head, 1 hp, 230 VAC, 8.9 A, 60 Hz Frequency, 1 ph ph, 1725 rpm Motor, 3-Wire Neoprene Cord, Non-Clogging Vortex Impeller, 130 deg F, Ball Bearing, Cast Iron, 13-9/16 in W x 19-9/16 in H Dimensions

• Durable, cast iron constructed switch case, motor and pump housing, base and impeller
• No sheet metal parts to rust or corrode
• All cast iron class 30 30000 lb tensile strength
• Stainless steel screws, bolts, float rod, handle, guard, arm and seal assembly
• Shaft seal - carbon and ceramic rotary face seal, with stainless steel wetted parts
• SAE 1117 carbon steel motor shaft (single seal models)
• Upper and lower ball bearing running in bath of oil
• Oil filled, hermetically-sealed, automatic reset thermal overload protected motor (1 ph and auto 3 ph)
• All models pass 2 in spherical solids
• Corrosion-resistant, powder coated epoxy finish
• Non-automatic operation
• 15 ft L cord
• Permanent split capacitor or 3 ph motor
• Class B insulation

• Catalog https://www.hirsch.com//ASSETS/DOCUMENTS/ITEMS/EN/Zoeller_204-1000_Catalog.pdf
• Instruction/Installation Manual https://www.hirsch.com//ASSETS/DOCUMENTS/ITEMS/EN/Zoeller_282-0001_Manual.pdf
• Specification Sheet https://www.hirsch.com//ASSETS/DOCUMENTS/ITEMS/EN/Zoeller_282-0001_Specification_Sheet.pdf