analytics

Zoeller® 161-0002 | Hirsch Pipe & Supply

Zoeller® 161-0002 High Head Flow-Mate 160 1-Phase Single Seal Submersible Effluent Pump, 100 gpm Max Flow, Automatic/Non Automatic: Non-Automatic, 56 ft Max Head, 115 VAC

Effluent or dewatering submersible pumps for septic tanks, low pressure pipe (LPP) and enhanced flow STEP systems.

Zoeller® Submersible Effluent Pump, 1-Phase Single Seal, Series: High Head Flow-Mate 160, 100 gpm, Non-Automatic, 1-1/2 in NPT Outlet, 56 ft Maximum Head, 1/2 hp, 115 VAC, 15.5 A, 60 Hz, 3450 rpm Motor, 3-Wire Neoprene Cord, Bronze Non-Clogging Vortex Impeller, 130 deg F, Ball Bearing, Cast Iron, 12-3/4 in W x 19-5/16 in H

Amperage Rating      :      15.5 A
Automatic/Non Automatic      :      Non-Automatic
Bearing Type      :      Ball
Cord Type      :      3-Wire Neoprene
Dimensions      :      12-3/4 in W x 19-5/16 in H
Frequency Rating      :      60 Hz
Horsepower      :      1/2 hp
Impeller Type      :      Bronze Non-Clog Vortex
Material      :      Cast Iron
Maximum Flow Rate      :      100 gpm
Maximum Head      :      56 ft
Motor Speed      :      3450 rpm
Outlet Size      :      1-1/2 in NPT
Series      :      High Head Flow-Mate 160
Temperature Rating      :      130 deg F
Type      :      1-Phase Single Seal
Voltage Rating      :      115 VAC
  • Durable, cast iron constructed switch case, base, motor and pump housing
  • Cast iron Class 25-30 (25,000X tensile strength)
  • Impeller - bronze class 85-5-5-5
  • Corrosion resistant, powder coated epoxy finish
  • Oil-filled, hermetically-sealed, automatic reset thermal overload protected motor
  • Upper and lower ball bearing running in bath of oil
  • Carbon and ceramic shaft seal
  • No screens to clog
  • Neoprene square ring and gasket
  • Stainless steel screws, bolts, float rod, handle, guard, arm and seal assembly
  • Passes 3/4 in (19 mm) spherical solids
  • 1-1/2 in NPT discharge with 2 or 3 in flange available
  • Automatic units available with float-operated, submersible, 2-pole mechanical switch
  • On point - 14-3/4 in, off point - 5 in
  • 100% of units are computerized tested
  • pdfCatalog https://www.hirsch.com//ASSETS/DOCUMENTS/ITEMS/EN/https://assets.unilogcorp.com/2/ITEM/DOC/Zoeller_204-1000_Catalog.pdf
  • pdfInstruction/Installation Manual https://www.hirsch.com//ASSETS/DOCUMENTS/ITEMS/EN/https://assets.unilogcorp.com/2/ITEM/DOC/Zoeller_G161_Manual.pdf
  • pdfSpecification Sheet https://www.hirsch.com//ASSETS/DOCUMENTS/ITEMS/EN/https://assets.unilogcorp.com/2/ITEM/DOC/Zoeller_161-0001_Specification_Sheet.pdf