The 2-valve bath and shower fitting is made with a cast brass body with replaceable seats designed for union connections on 6-inch centers. The stem units are all brass with a reinforced rubber packing and rubber seat washer. The stem units can be easily replaced from the front of the fitting without removing the valve body. The valve is supplied with a twin ell that connects the valve to the chrome plated diverter spout and the shower tube. The handles, spout and escutcheons are zinc die cast with a chrome plated finish. The shower arm is brass with a chrome plated finish, the escutcheon is stainless steel and the shower head is chrome plated plastic. Direct sweat union sleeves (C suffix) are available.

Central Brass Valve Set, 2.5 gpm Shower Flow, 5-1/4 in Spout Reach, 6 in Center Distance, 2 Handles, Canopy Handle, Built-In Transfer Valve/Cartridge, 1/2 in IPS Valve Inlet, 80 psi, Brass, Polished Chrome, 2-1/2 in Dia

• 1/2 in IPS or 1/2 in nominal copper union inlet
• Compression stems

• Instruction/Installation Manual https://www.hirsch.com//ASSETS/DOCUMENTS/ITEMS/EN/https://assets.unilogcorp.com/2/ITEM/DOC/Pioneer_6056_Manual.pdf
• Specification Sheet https://www.hirsch.com//ASSETS/DOCUMENTS/ITEMS/EN/https://assets.unilogcorp.com/2/ITEM/DOC/Pioneer_6056_Specification_Sheet.pdf