Eemax™ Electric Tankless Water Heater, Series: LavAdvantage™, 120 VAC, 20 A, 2400 W, 1 ph, 3/8 in Compression Water Connection, Nickel Chrome Heating Element, Energy Factor: 0.99, 14 AWG Wire, Wall Mount, 0.35 gpm at 47 deg F Rise Recovery, 30 to 150 psi, 70 to 140 deg F, ASME Yes/No: No, White, 5-1/4 in W x 3 in D x 9-3/4 in H, Commercial Commercial/Residential/Dual, Domestic

• On demand hot water - No delay
• Cut energy waste - Flow switch activates heater only when water is running, no standby heat loss
• Endless hot water - no storage capacity to deplete
• Reduces installation cost and material - No temperature and pressure valve required
• Select models supplied with a PCA flow restricting aerator - ensures proper volume and effective flow
• Easy installation - Simple compression fittings that require no soldering, unit mounts directly to the wall with common hardware
• Prevents legionella bacteria growth
• Reduces calcification and sedimentation
• The wetted surface of this product contacted by water contains less than 0.25% lead and meets ANSI/NSF 372
• 0.2 gpm turn-on
• Replaceable cartridge bare wire element
• Bottom plumbing configuration
• Microprocessor temperature control Point-Of-Use

• Instruction/Installation Manual https://www.hirsch.com//ASSETS/DOCUMENTS/ITEMS/EN/Eemax_SPEX012240T_Manual.pdf
• Specification Sheet https://www.hirsch.com//ASSETS/DOCUMENTS/ITEMS/EN/Eemax_SPEX012240T_Specification_Sheet.pdf
• Warranty Information https://www.hirsch.com//ASSETS/DOCUMENTS/ITEMS/EN/Eemax_AP032208EE_Warranty.pdf