The Saniplus is a 1/2 hp pump system used to install a complete bathroom up to 15 ft below the sewer line or even up to 150 ft away from a soil stack. It incorporates a macerating system which can handle human waste and toilet paper in residential applications. The blade is made out of a hardened stainless steel material which eliminates the need for any service or replacement.

Saniflo® Saniplus® Macerator Pump, 1.28 gpf, 2 in Inlet, 0.5 hp, 115 VAC, 4.5 A, 60 Hz, 104 deg F, 20 in W x 9-1/4 in D x 12-7/8 in H

• Discharges the waste through a 3 /4 or 1 in rigid pipe
• Non-return valve is included on the discharge elbow assembly provided with the system
• Elbow can be rotated 360 deg depending on the discharge installation
• Has been designed with a 1-1/2 in vent connection on the top of the lid
• All plumbing codes require connection to a vent system
• Must be connected to Saniflo® 1.28 gpf rear discharge toilet
• Will also discharge gray water from any sink, bath/shower or urinal
• Wastewater will drain into the system via two 2 in inlets with built-in check valves on either side of the housing, note that when adding a bathtub/shower, the base should be raised up by a minimum of 6 in off the floor
• 0.5 hp oil-filled thermally protected motor
• 45 uF capacitor
• 47-1/2 in power cord
• = 53 dBA noise level measured at 3 ft
• 15 ft vertical 17 gpm, 150 ft horizontal 27 gpm discharge
• 3/4 in discharge pipe diameter