Zoeller® 63-0001 | Hirsch Pipe & Supply

Zoeller® 63-0001 M63 Automatic Submersible Pump With (1) Seal, 43 gpm Flow Rate, 1-1/2 in NPT Outlet, 1/3 hp, Cast Iron, Domestic

These Premium sump pumps are designed with the very best materials and latest technology. Based on the 50 series sump pump, considered one of America’s most popular sump pumps, this product offers advanced switch technology allowing longer switch life. This model is constructed of the same heat-dissipating cast iron with powder coated epoxy finish, providing maximum pumping performance under the most extreme conditions. With Zoeller’s cool run design, the hermetically-sealed, oil-filled motor and non-clogging vortex impeller add up to a long-lasting, trouble-free product. The heavy-duty power cord also includes an LED lighted plug.

Zoeller® Submersible Pump, Automatic, Series: M63, 43 gpm, 1-1/2 in NPT Outlet, 19-1/4 ft Maximum Head, 115 VAC, 9.7 A, 130 deg F, 1/3 hp, Non-Clogging Vortex Impeller, Polypropylene Float, 3-Wire Cord, Sleeve Bearing Bearing, 1/2 in Maximum Dia of Solids, Cast Iron, Green, Powder Epoxy Coated, 10-3/32 in W x 10-1/16 in H, Domestic

Amperage Rating      :      9.7 A
Bearing Type      :      Sleeve Bearing
Color      :      Green
Cord Type      :      3-Wire
Dimensions      :      10-3/32 in W x 10-1/16 in H
Domestic/Import      :      Domestic
Finish      :      Powder Epoxy Coated
Float Material      :      Polypropylene
Flow Rate      :      43 gpm
Horsepower      :      1/3 hp
Impeller Type      :      Non-Clogging Vortex
Material      :      Cast Iron
Maximum Diameter of Solids      :      1/2 in
Maximum Head      :      19-1/4 ft
Outlet Size      :      1-1/2 in NPT
Series      :      M63
Temperature Rating      :      130 deg F
Type      :      Automatic
Voltage Rating      :      115 VAC
  • Float-operated, submersible, 2-pole mechanical switch integrating advanced switch technology
  • Corrosion-resistant, powder coated epoxy finish
  • All cast iron construction
  • FKM outer switch boot
  • No sheet metal parts to rust or corrode
  • Stainless steel screws, switch arm, guard and handle
  • No screens to clog
  • Watertight, neoprene square ring between motor and pump housing
  • Oil-filled, hermetically-sealed, automatic reset thermal overload protected motor
  • Upper and lower sleeve bearings running in bath of oil
  • Entire unit pressure-tested after assembly
  • Carbon and ceramic shaft seal
  • Maximum temperature for effluent or dewatering 130 deg F
  • Passes 1/2 in (12 mm) spherical solids
  • Watertight and dust-tight
  • Permanently oiled bearings
  • Cast iron impeller
  • Solid, buoyant, polypropylene float
  • Single phase motor
  • Oil filled cooling
  • pdfCatalog
  • pdfInstruction/Installation Manual
  • pdfLine Drawing
  • pdfSpecification Sheet