piwik image

Laing E1-BCANCT1W-06 | Hirsch Pipe & Supply

Laing E1-BCANCT1W-06 Autocirc Pump with Fixed Thermostat and Timer

E1-BCANCT1W-06 (LHB08100092) Laing Autocirc Pump with Fixed Thermostat and Timer

The auto circ pump is installed under the sink or faucet farthest from the water heater - where hot water usually takes the longest amount of time to arrive.

A built-in temperature sensor automatically turns the autocirc pump on when the water temperature in the hot water supply line cools down to 85º F. This cool water in the hot water supply line is then pumped into the cold water line and back into the water heater.

The autocirc pump turns off automatically when the hot water supply line to the faucet reaches a temperature of 95º F, ensuring the instant availability of shower warm water with maximum temperature hot water only seconds behind. When the pump is automatically turned off by the built-in thermostat, an auto closure device prevents hot or cold water from mixing in either supply line.

Another beneficial feature is that hot water will also be instantly available at all other faucets in the supply line between the water heater and the faucet where the autocirc pump is installed.

  • No return line required
  • Standard water heater application
  • Compact spherical motor design
  • Energy efficient ECM motor
  • Permanent Magnet Electronically Commutated Motor
  • Silent operation
  • Built-in temperature control
  • Built-in 24 hour timer with multiple on/off settings
  • 6 foot power cord
  • Saves the average family of four up to 17,000 gallons of water annually

*Replacement Model for: ACT-303-BTW