This is our fastest growing line of effluent pumps. The 150 series is truly a workhorse designed for reliability under extreme conditions in an effluent environment. 150 series pump curves cover a wide range of applications. They are well suited to applications with low pressure pipe (LPP) and enhanced flow STEP systems. Zoeller's cool run design and corrosion resistant, powder coated epoxy finish, in addition to the hermetically sealed, oil-filled motor and non-clogging vortex impeller add up to a long-lasting, trouble-free product.

Zoeller® Effluent Pump, 1-Phase Single Seal, Series: High Head Dose-Mate 150, 77 gpm, Automatic, 1-1/2 in NPT Outlet, 38 ft Maximum Head, 4/10 hp, 115 VAC, 8.5 A, 60 Hz, 3450 rpm Motor, Engineered Thermoplastic Non-Clog Vortex Impeller, 130 deg F, Sleeve Upper/Ball Lower Bearing, Cast Iron, 12-1/8 in H

• Corrosion resistant, powder coated epoxy finish
• Stainless steel lifting handle
• Assembled with stainless steel bolts
• 4/10 hp, passes 3/4 in spherical solids
• Oil-filled, hermetically-sealed, automatic reset thermal overload protected
• Carbon/ceramic seals
• Upper sleeve bearing and lower ball bearing running in a bath of oil
• 20 ft, UL listed power cord with molded, 3-wire plug
• 1-1/2 in NPT vertical discharge
• For septic tank, low pressure pipe (LPP) and enhanced flow STEP systems
• Over 130 deg F special quotation required

• Catalog https://www.hirsch.com//ASSETS/DOCUMENTS/ITEMS/EN/https://assets.unilogcorp.com/2/ITEM/DOC/Zoeller_204-1000_Catalog.pdf
• Instruction/Installation Manual https://www.hirsch.com//ASSETS/DOCUMENTS/ITEMS/EN/https://assets.unilogcorp.com/2/ITEM/DOC/Zoeller_BN152_Manual.pdf
• Specification Sheet https://www.hirsch.com//ASSETS/DOCUMENTS/ITEMS/EN/https://assets.unilogcorp.com/2/ITEM/DOC/Zoeller_152-0002_Specification_Sheet.pdf