piwik image

3M™ Aqua-Pure™ 016145-12340 | Hirsch Pipe & Supply

3M™ Aqua-Pure™ 016145-12340 Drop-in Standard Diameter Whole House Replacement Filter Cartridge, 2-1/2 in OD x 9.8 in H, 8 gpm, 40 to 100 deg F, 125 psi

The 3M™ Aqua-Pure™ whole house standard diameter water filter drop-in replacement cartridge AP1001 for the AP100 & standard and large diameter stainless steel housing series, is a good choice in water filtration. This standard 2.5 in diameter drop-in cartridge is manufacturer tested and verified to reduce sediment down to 1 micron nominal. Its rigid construction from our proprietary polypropylene manufacturing process, helps to eliminate "unloading" of sediment due to variances in water pressure, sometimes referred to as water hammer. To maximize system performance and efficiency, regularly scheduled maintenance including replacement of the filter cartridges at the required interval, at the rated capacity, or sooner if a reduction in water flow occurs is required. Filter life is dependent on actual use and incoming water quality. 3M™ branded water filtration products have been addressing water quality issues for over 50 years. 3M™ products offer a wide range of solutions designed to address many types of water quality concerns. Third-party certifications, such as NSF and WQA, are an advantage provided on many 3M™ Aqua-Pure™ water quality improvement solutions. 3M™, a household brand name, is a known leader in filtration technology recognized for innovation, trust and quality around the world. This translates to clean and clear drinking water in your home is both a pleasure and a reassurance that you're giving your family the best. With a water filtration system from 3M™ purification, you can provide filtered drinking water for every member of your family. From whole home water filtration to drinking water systems, look to 3M™ purification to help you find the right solution.

3M™ Aqua-Pure™ Replacement Filter Cartridge, Drop-in Standard Diameter Whole House, 2-1/2 in Outside Dia, 9.8 in Height, 8 gpm, 40 to 100 deg F, 125 psi Maximum, 1 micron, Polypropylene Filter

Filter Material      :      Polypropylene
Filter Rating      :      1 micron
Flow Rate      :      8 gpm
Height      :      9.8 in
Maximum Pressure      :      125 psi
Outside Diameter      :      2-1/2 in
Temperature Rating      :      40 to 100 deg F
Type      :      Drop-in Standard Diameter Whole House
  • Manufactured using proprietary thermally bonded polypropylene/polyethylene manufacturing process
  • Rigid construction helps to eliminate sediment unloading due to variances in water pressure
  • 6 months (incoming water quality may affect cartridge life) average life
  • Extra fine load