analytics

Zoeller® 53-0016 | Hirsch Pipe & Supply
cart 0

Zoeller® 53-0016

Zoeller® 53-0016 Mighty-Mate 50 Single Phase Single Seal Automatic Submersible Pump, 43 gpm Flow Rate, 1-1/2 in NPT Outlet, 3/10 hp, Cast Iron

Considered one of America's most popular sump pumps. This robust family of sump pumps is known for reliability, durability and performance. The preset, integral snap-action float switch is engineered for one million mechanical starts. The heat-dissipating cast iron body with powder coated epoxy finish provides maximum pumping performance under the most extreme conditions. With Zoeller's cool run design, the hermetically sealed, oil-filled motor and non-clogging vortex impeller add up to a long-lasting, trouble-free product.

Zoeller® Submersible Pump, Single Phase Single Seal Automatic, Series: Mighty-Mate 50, 43 gpm, 1-1/2 in NPT Outlet, 19-1/4 ft Maximum Head, 3/10 hp, 115 VAC, 9.7 A, 60 Hz, 1550 rpm Motor, 25 foot 3-Wire Cord, Non-Clogging Vortex Impeller, 130 deg F, Sleeve Bearing, Cast Iron, 10-3/32 in W x 10-1/16 in H

Amperage Rating      :      9.7 A
Bearing Type      :      Sleeve
Cord Type      :      3-Wire
Dimensions      :      10-3/32 in W x 10-1/16 in H
Flow Rate      :      43 gpm
Frequency Rating      :      60 Hz
Horsepower      :      3/10 hp
Impeller Type      :      Non-Clogging Vortex
Material      :      Cast Iron
Maximum Head      :      19-1/4 ft
Motor Speed      :      1550 rpm
Outlet Size      :      1-1/2 in NPT
Series      :      Mighty-Mate 50
Temperature Rating      :      130 deg F
Type      :      Single Phase Single Seal Automatic
Voltage Rating      :      115 VAC
  • Float-operated, submersible, 2-pole mechanical switch and variable level, long-cycle systems available
  • Corrosion-resistant, powder coated epoxy finish
  • No steel sheet metal parts to rust or corrode
  • Stainless steel screws, guard, handle and switch arm
  • No screens to clog
  • Watertight, neoprene square ring between motor and pump housing
  • Solid, buoyant, polypropylene float
  • Oil-filled, hermetically-sealed, automatic reset thermal overload protected motor
  • Upper and lower sleeve bearings running in bath of oil
  • Entire unit pressure-tested after assembly
  • Carbon and ceramic shaft seal
  • Passes 1/2 in spherical solids
  • Watertight and dust-tight
  • Permanently oiled bearings
  • 7-1/4 in on point, 3 in off point
  • Cast iron switch case, motor and pump housing
  • Engineered thermoplastic base
  • Engineered, glass-filled, plastic impeller with metal insert
  • Stainless steel guard and handle
  • Lower and upper bearings, oil-fed cast iron
  • pdfCatalog https://www.hirsch.com//ASSETS/DOCUMENTS/ITEMS/EN/https://assets.unilogcorp.com/2/ITEM/DOC/Zoeller_204-1000_Catalog.pdf
  • pdfSpecification Sheet https://www.hirsch.com//ASSETS/DOCUMENTS/ITEMS/EN/https://assets.unilogcorp.com/2/ITEM/DOC/Zoeller_53-0001_Specification_Sheet.pdf