The industry standard circulator for decades, Series 100 is still the one by which most others are judged. With well over 10 million units installed, the Series 100 remains a leader in applications such as hydronic heating and domestic hot water circulation. Series 100's three-piece, oil lubricated design provides for easy field service with bearings, shaft and seal all housed in an assembly which can be easily repaired or replaced. The Series 100 oil lubricated motor is specifically designed for the Series 100, and its resilient mounting provides quiet, dependable service with minimum annual lubrication. The design of this motor, coupled with its overall hydraulic performance, allows the Series 100 to overcome system related noise caused by valves, fittings, or piping.

Bell & Gossett Circulator Booster Pump, 3-Piece, Series: 100, 33 gpm, 8 ft Maximum Head, 1/12 hp, 115 VAC, 1.75 A, 60 Hz, 125 psi Maximum, 1725 rpm Motor, In-Line Mount, 225 deg F, Sleeve Bearing, 14-7/8 in L

• Contains less than 0.25% lead content by weight on wetted surfaces
• Not to be used for construction purposes unless certified
• Equipped with a drip-proof motor are recommended for indoor use only
• Built-in overload protection
• 3/4, 1, 1-1/4 and 1-1/2 in NPT flange connection
• Construction: lead free bronze body, polypropylene/lead free brass impeller, carbon on ceramic mechanical seal, heat treated carbon steel shaft, oil lubricated bronze sleeve, flexible spring type coupler
• Single phase

• Catalog https://www.hirsch.com//ASSETS/DOCUMENTS/ITEMS/EN/https://assets.unilogcorp.com/2/ITEM/DOC/Xylem_110196LF_Catalog.pdf
• Specification Sheet https://www.hirsch.com//ASSETS/DOCUMENTS/ITEMS/EN/https://assets.unilogcorp.com/2/ITEM/DOC/Xylem_102206_Specification_Sheet.pdf