This portable pump is perfect for boosting water pressure, draining hot water tanks and general water transfer. Features include a one-piece cast aluminum pump and motor housing with integral carry handle, permanently lubricated bearings, a convenient On/Off switch, and a powerful 1/2 hp motor capable of pumping to over 100 feet of head. Not intended for permanent installations.

Liberty Pumps® Transfer Pump, Portable Heavy Duty, 1/2 hp, 115 VAC, 8 A, 7500 rpm Motor, Ball Bearing, 3/4 in, 20 ft Cord, Cast Aluminum, 9-3/4 in L x 4-1/2 in W x 7 in H, Domestic

• One-piece cast aluminum pump and motor housing with integral carry handle
• Durable epoxy powder coat finish
• Convenient On/Off switch
• 3/4 in brass garden hose connectors
• Glass reinforced thermoplastic impeller
• Permanently lubricated ball bearings
• Large prime plug with internal funnel design for easy priming
• Easily replaced motor brushes
• Maximum discharge head of 105 ft
• Maximum suction lift of 15 ft
• 60 Hz frequency rating
• 135 deg F maximum fluid temperature
• Note: the model 331 is not intended for use in wet or damp areas, motor is not submersible
• Not intended to pump chemicals or flammable liquids and motor brushes require replacement approximately every 300 hours of use

• Catalog https://www.hirsch.com//ASSETS/DOCUMENTS/ITEMS/EN/https://assets.unilogcorp.com/2/ITEM/DOC/Liberty_Pumps_331_Catalog.pdf
• Instruction/Installation Manual https://www.hirsch.com//ASSETS/DOCUMENTS/ITEMS/EN/https://assets.unilogcorp.com/2/ITEM/DOC/Liberty_Pumps_331_Manual.pdf
• Specification Sheet https://www.hirsch.com//ASSETS/DOCUMENTS/ITEMS/EN/https://assets.unilogcorp.com/2/ITEM/DOC/Liberty_Pumps_331_Specification_Sheet.pdf
• Video Link https://youtu.be/Q4w1nONJf48
• Warranty Information https://www.hirsch.com//ASSETS/DOCUMENTS/ITEMS/EN/https://assets.unilogcorp.com/2/ITEM/DOC/Liberty_Pumps_K001184_Warranty.pdf