Sioux Chief 525-PB series StrongArm™ with Plastic Bend Support preassembled bracketing system shall be used when penetrating a wall with 1/2 in PEX. Brackets shall be corrosion-resistant and secured to wood or metal studs with approved hardware. System shall include plastic bend (elbow) device that swivels 360 degree when captured within a LockBlock™ assembly. Plastic Bend Support shall slide across pair of parallel brackets allowing installer to secure 1/2 in PEX tube at any desired location within the stud cavity. Bracket assembly with Plastic Bend Support devices and bulk components shall be IAPMO listed.

Tomahawk StrongArm™ Twisted Bracket, Series: 525-PB, 25 lb, 16 ga Thickness, Steel, Galvanized, 2.2712 in W x 2.1472 in H, 140 deg F, Domestic

• Use when stubbing out with 1/2 in flexible CTS tube
• StrongArm™ brackets provide a very rigid installation
• Plastic elbow swivels 360 deg to work with tubing coming from any direction
• PEX Bend LockBlock™ are pre-assembled on each pair of brackets
• Position stub outs at any desired location within the stud bay
• When screw on blocks are tightened, blocks compress on tube, brackets and elbow eliminating all movement
• Twisted brackets mount to face of stud, and L-bent brackets mount inside stud cavity
• For 16 in stud bay
• (1) plastic PEX bend support

• Catalog https://www.hirsch.com//ASSETS/DOCUMENTS/ITEMS/EN/https://assets.unilogcorp.com/2/ITEM/DOC/Sioux_525-1612_Catalog.pdf
• Instruction/Installation Manual https://www.hirsch.com//ASSETS/DOCUMENTS/ITEMS/EN/https://assets.unilogcorp.com/2/ITEM/DOC/Sioux_525-161PB_Manual.pdf
• Specification Sheet https://www.hirsch.com//ASSETS/DOCUMENTS/ITEMS/EN/https://assets.unilogcorp.com/2/ITEM/DOC/Sioux_525-161PB_Specification_Sheet.pdf
• Video Link http://www.youtube.com/watch?v=kRPa5c5A6W8