analytics

Zoeller® 98-0001 | Hirsch Pipe & Supply

Zoeller® 98-0001 Flow-Mate M98 Automatic Effluent or Dewatering Submersible Pump, 73 gpm Flow Rate, 1-1/2 in Outlet, 1/2 hp, Cast Iron

This "Flow-Mate" model submersible pump is designed for use in residential or light commercial dewatering applications and can be used to transfer groundwater or effluent. This durable cast iron pump includes a powder coated epoxy finish to prevent corrosion and is designed to provide great heat dissipation from the motor, ensuring a long service life. As with every Zoeller pump, each one is 100% pressure-tested, submerged and run to ensure quality and reliability for years of trouble-free performance! This attention to detail is an inherent feature of every pump, making it one of the most reliable in the industry.

Zoeller® Effluent or Dewatering Submersible Pump, Automatic, Series: Flow-Mate M98, 73 gpm, 1-1/2 in Outlet, 23 ft Maximum Head, 1/2 hp, 115/230 VAC, 9.4 A, 60 Hz, 1725 rpm Motor, Non-Clogging Vortex Impeller, 130 deg F, Oil Fed Bearing, Cast Iron, 12-1/16 in H x 10-1/8 in W

Amperage Rating      :      9.4 A
Bearing Type      :      Oil Fed
Dimensions      :      12-1/16 in H x 10-1/8 in W
Flow Rate      :      73 gpm
Frequency Rating      :      60 Hz
Horsepower      :      1/2 hp
Impeller Type      :      Non-Clogging Vortex
Material      :      Cast Iron
Maximum Head      :      23 ft
Motor Speed      :      1725 rpm
Outlet Size      :      1-1/2 in
Series      :      Flow-Mate M98
Temperature Rating      :      130 deg F
Type      :      Automatic
Voltage Rating      :      115/230 VAC
  • Float operated 2-pole mechanical switch
  • Corrosion resistant, powder coated epoxy finish
  • No sheet metal parts to rust or corrode
  • Stainless steel screws, guard, handle, arm and seal assembly
  • No screens to clog, all castings are cast iron class 25 to 30 25000 tensile strength, watertight, neoprene square ring between motor and pump housing
  • Permanent split capacitor motor, oil filled and hermetically-sealed, automatic reset thermal overload protection
  • Watertight, neoprene square ring between motor and pump housing
  • Cast iron switch case, motor, pump housing and base, bearings, upper and lower oil fed cast iron, carbon and ceramic shaft seal
  • Entire unit pressure tested after assembly
  • Class B insulation, 9-1/2 in/3 in auto On/Off points
  • 1/2 in spherical solids handling, 15 ft cord, oil filled cooling
  • Auto reset thermal overload motor protection
  • Cast iron cap, motor and pump housing, base, carbon and ceramic mechanical seals, engineered plastic impeller, stainless steel hardware, neoprene gasket
  • AISI 1215 cold roll steel motor shaft
  • Single phase
  • 1-1/2 in NPT discharge
  • pdfCatalog https://www.hirsch.com//ASSETS/DOCUMENTS/ITEMS/EN/https://assets.unilogcorp.com/2/ITEM/DOC/Zoeller_98_0001_Catalog.pdf
  • pdfInstruction/Installation Manual https://www.hirsch.com//ASSETS/DOCUMENTS/ITEMS/EN/https://assets.unilogcorp.com/2/ITEM/DOC/Zoeller_98-0001_Manual.pdf
  • pdfLine Drawing https://www.hirsch.com//ASSETS/DOCUMENTS/ITEMS/EN/https://assets.unilogcorp.com/2/ITEM/DOC/Zoeller_98-0001_Line_Drawing.pdf
  • pdfSpecification Sheet https://www.hirsch.com//ASSETS/DOCUMENTS/ITEMS/EN/https://assets.unilogcorp.com/2/ITEM/DOC/Zoeller_98-0001_Specification_Sheet.pdf