Takagi 100123390 | Hirsch Pipe & Supply

Takagi 100123390 H3 Tankless Water Heater, Natural Gas Fuel, 199000 Btu/hr Heating, Indoor/Outdoor: Outdoor, Condensing, 10 gpm Flow Rate, 4 in Vent, 0.95, Commercial/Residential

The T-H3 is well suited for residential/commercial applications such as small restaurants and beauty salons. Complies with Ultra-Low NOx regulations. Utilizing commercial grade copper alloy for the heat exchanger tubing, the T-H3 is also suitable for heavier residential usages such as space heating or domestic recirculation systems. Remote control included as a standard feature on outdoor models. Certified up to 10100 ft altitude.

Takagi Tankless Water Heater, Series: H3, 199000 Btu/hr Heating, Natural Gas Fuel, 3/4 in MNPT Gas Connection, Electronic Spark Ignition, 4 in Vent, Condensing/Non condensing: Condensing, 10 gpm, 0.95, Wall Mounting, 3/4 in MNPT Water Connection, 4 to 10-1/2 in WC Gas/15 to 150 psi Water, 100 to 160 deg F, Ultra Low Nox: Yes, 316L Stainless Steel/Copper, Indoor/Outdoor: Outdoor, 17-3/4 in W x 11-1/4 in D, Commercial/Residential/Dual: Commercial/Residential

Commercial/Residential/Dual      :      Dual
Condensing/Non Condensing      :      Condensing
Dimensions      :      17-3/4 in W x 11-1/4 in D
Energy Factor      :      0.95
Flow Rate      :      10 gpm
Fuel Type      :      Natural Gas
Gas Connection      :      3/4 in MNPT
Heating Capacity      :      199000 Btu/hr
Ignition Type      :      Electronic Spark
Indoor/Outdoor      :      Outdoor
Material      :      316L Stainless Steel/Copper
Mounting Type      :      Wall
Pressure Rating      :      4 to 10-1/2 in WC Gas/15 to 150 psi Water
Series      :      H3
Temperature Rating      :      100 to 160 deg F
Type      :      Outdoor Condensing
Ultra Low NOx      :      Yes
Vent Size      :      4 in
Vent Type      :      Power Direct
Water Connection      :      3/4 in MNPT
  • Primary heat exchanger utilizes commercial-grade copper alloy for 25 times better heat transfer than stainless steel
  • Secondary heat exchanger utilizes 316L stainless steel for better corrosion resistance
  • Easy-link up to 4 units without a multi-unit controller
  • Multi-link up to 20 units with a multi-unit controller
  • Number of showers unit can handle, depending on ground water temperature
  • Venting with SCH 40/STD PVC, CPVC, PP, category III stainless steel
  • Safety features include freeze, overheat, surge protection and troubleshooting diagnostic codes
  • pdfCatalog
  • pdfInstruction/Installation Manual
  • pdfSpecification Sheet
  • pdfWarranty Information