An Electrical Control Panel is used on a simplex pump application where automatic electrical cycling of the pump is desired for added protection in residential or commercial applications. A control panel is required for all systems using a non-automatic pump. The built-in alarm system, a standard feature, will activate when the water level becomes unusually high. All electrical systems must be installed by a qualified electrician and according to the National Electrical Code (see section 430-113, plus any others that apply).

Zoeller® Electrical Control Panel, Simplex, 115/208 to 230 VAC, 0 to 20 A, 10 in H x 8 in W x 4 in D, For Use With: Single Phase Simplex Installation Pump

• Dead front panel
• Clear inner door
• Complete with three 20 ft (6 m) control float switches
• Equipment disconnect
• Motor contactor
• NEMA 4X watertight enclosure with lockable latch
• Top-mounted alarm light
• Alarm horn provides audio warning of alarm condition (83 to 85 decibel rating)
• Branch circuit protection provided by installing electrician
• Pump run indicator light
• Horn silence and alarm test toggle switches
• HOA switch
• Complete installation instructions included
• Lockable latch
• Dry auxiliary contact (not available in plug-in panels)
• Single phase simplex plug-in control panel features: NEMA 4X enclosure with hinged cover
• Receptacle for use with piggyback pump switch
• Alarm horn (83 to 85 decibel rating)
• Terminal strip
• Horn silence switch to turn alarm on or off

• Catalog https://www.hirsch.com//ASSETS/DOCUMENTS/ITEMS/EN/https://assets.unilogcorp.com/2/ITEM/DOC/Zoeller_10-0682_Catalog.pdf
• Specification Sheet https://www.hirsch.com//ASSETS/DOCUMENTS/ITEMS/EN/https://assets.unilogcorp.com/2/ITEM/DOC/Zoeller_10-0125_Specification_Sheet.pdf