Series LF70A, LFL70A Hot Water Extender Tempering Valves are used in residential water supply applications to mix cold and hot water to extend capacity of water heater storage tanks and hot water boiler tankless heaters. It features Lead Free* brass body construction, dial adjustment cap, replaceable thermostat, stainless steel spring and is available with either threaded or solder end connections . Series LF70A temperature range: 120 deg F to 160 deg F. Series LFL70A temperature range: 100 deg F to 130 deg F. Maximum Pressure: 150psi (10 bar).

WATTS® Hot Water Extender Tempering Valve, Series: LF70A, 3/4 in Nominal, C, 150 psi, 100 to 130 deg F, 2 gpm, Media: Water, Brass Body, Stainless Steel Trim, 4-1/8 in L x 2-3/4 in W, Domestic

• Thermostat assembly is easy to maintain, remove and replace
• Simple maintenance thermostat assembly is easily removed and replaceable as a unit
• Finger tip dial adjustment cap
• Stainless steel spring
• The wetted surface of this product contacted by consumable water contains less than one quarter of one percent (0.25%) of lead by weight
• Indicates 3rd party certification that product contains less than one quarter of one percent (0.25%) lead by weight on its wetted surfaces contacted by consumable water

• Instruction/Installation Manual https://www.hirsch.com//ASSETS/DOCUMENTS/ITEMS/EN/https://assets.unilogcorp.com/2/ITEM/DOC/WATTS_0559133_Manual.pdf
• Specification Sheet https://www.hirsch.com//ASSETS/DOCUMENTS/ITEMS/EN/https://assets.unilogcorp.com/2/ITEM/DOC/WATTS_0559133_Specification_Sheet.pdf